4.9/5 from 25,000+ Homeowners

Toilet Installation & Replacement in Orlando, FL

Professional toilet installation, replacement, and repair for Orlando homes

Providing Expert Service Since 2007

Is Your Toilet Showing These Signs It's Time for a Replacement?

Constant Running or Phantom Flushing

A toilet that runs continuously or flushes on its own is wasting hundreds of gallons of water per month. When internal repairs no longer hold, replacement is the cost-effective solution.

Frequent Clogs and Weak Flushes

A toilet that clogs regularly or requires multiple flushes to clear the bowl signals an aging trapway, mineral buildup, or an outdated low-flow design that modern toilets have long since solved.

Cracks in the Tank or Bowl

Any visible crack in the porcelain, even a hairline crack, can worsen without warning, causing a sudden leak that dumps gallons of water onto your bathroom floor and into the subfloor below.

Wobbling, Leaking at the Base, or Persistent Odor

A toilet that rocks, leaks water at the base, or emits sewer odors indicates a failed wax ring, a corroded flange, or subfloor damage that should be addressed during replacement.

Complete Toilet Installation & Replacement Services in Orlando, FL

From older homes in College Park and Winter Park to brand-new subdivisions in Lake Nona and Baldwin Park, the needs for toilet installation and replacement vary widely among local households. Many homes across Orange County still have outdated high-gallon toilets that increase water bills and waste thousands of gallons annually, while Florida’s focus on water conservation continues to encourage upgrades to WaterSense-certified fixtures. Orlando’s hard water can also wear down internal toilet components more quickly, leading to leaks, poor flushing, and premature failures. Our certified plumbers handle selection guidance, removal, installation, and disposal of the old unit so the job is done right the first time.

Standard Toilet Installation & Replacement

Standard toilet replacement in Orlando begins with shutting off your home’s water supply, disconnecting and removing the old toilet, and inspecting the flange and surrounding subfloor for hidden damage.

A total replacement generally includes:

If water damage from a previous leak has affected your subfloor, repairs should be completed before the new toilet is installed to ensure long-term stability. Then, we can replace the wax ring or install a modern wax-free seal, properly set and level the new toilet, reconnect the supply line, and thoroughly test flush performance and leak protection.

High-Efficiency & Water-Saving Toilets

Federal standards currently require toilets to use no more than 1.6 gallons per flush, while WaterSense-certified models use 1.28 gallons or less and can save approximately 13,000 gallons of water annually for a family of four compared to older 3.5 to 7 GPF toilets.

We can help with:

Modern options include single-flush 1.28 GPF models, dual-flush systems with 0.8/1.28 GPF settings, and pressure-assisted toilets that provide powerful flushing with minimal water usage. Today’s WaterSense toilets must pass strict performance testing standards, and trusted brands such as Kohler, TOTO, American Standard, and Delta offer highly efficient models.

Specialty & Upgraded Toilet Installation

If you’re a homeowner looking for greater comfort, accessibility, or modern bathroom upgrades, you may want a specialty toilet installation. Comfort-height ADA-compliant toilets sit approximately 17 to 19 inches high instead of the traditional 15 inches, making them easier for seniors, taller adults, and individuals with mobility concerns.

Our plumbing professionals can offer you:

Bidet toilets and bidet seat installations continue to grow in popularity and may require nearby electrical outlets, GFCI protection, and upgraded water supply connections. Wall-hung toilets provide a sleek, modern appearance with easier floor cleaning, though they require concealed in-wall carrier systems and more extensive rough-in work.

Toilet Repair & Component Replacement

Not every toilet problem requires complete replacement, and many common issues can be repaired cost-effectively. Running toilets, weak flushing, phantom flushing, loose or rocking bases, leaking seals, slow tank fills, and broken handles are often caused by worn internal components.

Our professional plumbers can address:

Toilets leaking at the base or producing sewer odors often require a wax ring replacement, which involves properly removing and resetting the toilet. If flange corrosion or structural damage prevents a secure seal, flange repair or replacement may also be necessary.

100% Satisfaction Guarantee

If you’re not completely satisfied with our work, we’ll make it right or refund your money.

Toilet Installation & Replacement FAQs

Toilet installation and replacement cost depends on the type of toilet and the complexity of the job. A standard replacement is the most affordable, while high-efficiency upgrades, comfort-height models, bidet toilets, and wall-hung systems cost more because of the additional materials and labor involved. Any flange repair or subfloor work also affects the total. We provide upfront pricing before any work begins, so there are no surprises.

Most standard toilet replacements, without complications, can be completed in 1 to 2 hours during a single visit. Installations involving flange repair may take 2 to 3 hours, while subfloor repairs can extend the project to 3 to 5 hours. Wall-hung toilet installations and major bathroom modifications may require 1 to 2 days, depending on the scope of work.

If the toilet is under 10 to 15 years old and the issue involves a single replaceable component, repairs are often worthwhile. Toilets over 15 to 20 years old that require repeated repairs or use 3.5+ gallons per flush are usually better candidates for replacement.

Most toilets are designed for a standard 12-inch rough-in, which is the distance from the wall to the center of the drain flange. However, 10-inch and 14-inch rough-in models are also available for non-standard bathrooms.

Yes, licensed plumbers can install customer-supplied toilets as long as the fixture is compatible with the existing plumbing setup and arrives undamaged. Our plumber will confirm the correct rough-in measurement and inspect the unit before installation begins.

Most professional toilet installation services include labor warranties ranging from 1 to 2 years, covering workmanship, seals, supply-line connections, and leak protection. Manufacturer warranties on the toilet itself vary by brand and model, typically ranging from 1 to 10 years.

Schedule Professional Toilet Installation in Orlando

Whether you need a simple toilet replacement, a high-efficiency upgrade, emergency repair service, or a luxury smart toilet installation, our experienced plumbers in Orlando provide reliable solutions tailored to your home and budget. Schedule an estimate today to get expert guidance, upfront pricing, and dependable toilet installation or replacement service backed by professional workmanship warranties!

Orlando toilets flush over 32 million gallons of water a dayBenjamin Franklin Plumbers are ready to complete Toilet Installation in Orlando, FL., so they are certainly busy. If your toilet isn’t up to the challenge, Benjamin Franklin Plumbing can help. We install toilets from the top brands and have options for various budgets. Call us today to schedule toilet installation in Orlando, FL.

When to Replace Your Toilet

If your toilet is on the fritz, you have to decide if you should repair or replace it. Benjamin Franklin can help you make the decision. Also, consider replacing the toilet if it’s:
  • Past Its Lifespan

    • Toilets last an average of 25 years before needing to be replaced. If your toilet is reaching the end of its lifespan, consider replacing it instead of getting another repair. Otherwise, you’ll likely have to repair the toilet frequently.
  • Guzzles Water

    • Many of the toilets installed in Orlando homes before 1994 use 3.5 gallons of water per flush. The EPA’s current standards went into effect in 1994, and now, toilets can only use 1.6 gallons of water per flush. With Orlando’s sky-high water bills, it’s a good time to save money by installing a water-efficient toilet.
  • Requires Multiple Flushes

    • Toilets lose some flushing power once they reach the end of their lifespans. When this happens, you’ll have to flush multiple times to clear the bowl, which is frustrating and expensive. Your water bill will thank you after you upgrade to a new toilet.
  • Cracked

    • Even small cracks can cause leaks, so contact a plumber right away. The plumber can discuss possible repairs, but a replacement is the better option if the cracks are significant.
  • Clogs Frequently

    • Older toilets aren’t nearly as efficient as newer models, which can result in constant clogging. Your toilet can also clog due to sediments that build up over a toilet’s lifespan. If you reach for the plunger repeatedly, it’s time for a new toilet.
  • Always Needing Repairs

    • Occasional repairs are needed to keep toilets in good condition. Still, you shouldn’t have to call a plumber every month to fix your toilet. Those repair bills will add up, so you can save money in the long run by installing a new toilet.

Efficient Toilet Installation in Orlando, FL

Imagine scheduling a toilet installation, but the plumber doesn’t show up. That’s beyond frustrating, and it’s avoidable with Benjamin Franklin Plumbing. As Orlando’s punctual plumbers, you don’t have to worry about late or missed appointments with us. Contact us today to schedule an appointment for your new toilet.